lt;b>The easy way to hold 90° corner joints and "T" joints in boxes, cabinets, and cases</b><br><br>The Kreg® 90° Corner Clamp gives you the helping hand you need to hold 90° corners and “T” joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° Corner Clamp leaves both of your hands free to add your fasteners. The 90° Corner Clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.
<br><br>
The 90° Corner Clamp helps hold assemblies like boxes, cabinets, drawers and cases together to ensure that you get strong, tight-fitting assemblies—whether you're using Kreg pocket-hole joinery, or another method. The clamp's V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg Screws, or even another type of fastener, such as a nail or wood screw.
<br><br>
The 90° Corner Clamp features all-metal construction, including cast-aluminum pads—an outer "V" and inner wedge—that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases.
<br><br>
Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you're using thin plywood for drawers, or materials up to 1" thick.<br><br><li>Works on 90° corners and T joints<li>1" max capacity<li>Cast aluminum V and wedge clamp pads<li>Automaxx® auto adjust technology<li>Easy-to-regulate clamping pressure with thumbwheel<li>Cutout allows driving a pocket hole screw without removing clamp<li>Padded ergonomic handles
The easy way to hold 90° corner joints and T joints in boxes, cabinets, and cases
The Kreg® 90° Corner Clamp gives you the helping hand you need to hold 90° corners and “T” joints together securely when you’re assembling boxes, drawers, cabinets and cases. Plus, the 90° Corner Clamp leaves both of your hands free to add your fasteners. The 90° Corner Clamp is the fastest, easiest-to-use corner clamp you can buy thanks to Kreg Automaxx® auto-adjusting technology.
The 90° Corner Clamp helps hold assemblies like boxes, cabinets, drawers and cases together to ensure that you get strong, tight-fitting assemblies—whether you're using Kreg pocket-hole joinery, or another method. The clamp's V-wedge jaws grip the mating pieces securely, ensuring that the pieces sit at precise 90° angles while you drive in Kreg Screws, or even another type of fastener, such as a nail or wood screw.
The 90° Corner Clamp features all-metal construction, including cast-aluminum pads—an outer V and inner wedge—that press against the inside and outside faces of the two pieces being joined in order to hold those pieces at a 90° angle to one another. Edge stops also help align the edges of the pieces to ensure accurate assembly of structures like boxes, cabinets, drawers, and cases.
Thanks to Automaxx® auto-adjust technology, all you have to do is squeeze the clamp handles. The clamp will automatically close with the amount of pressure you have set, regardless of the material, whether you're using thin plywood for drawers, or materials up to 1 thick.
* Works on 90° corners and T joints * 1 maximum capacity * Cast aluminum V and wedge clamp pads * Automaxx® auto-adjust technology *
90° Corner Clamp
【90°Degree Corner Clamp】This clamp is designed to securely hold workpieces at a 90° angle and on T joints. The V-shaped wedge ensures a firm grip,
DRAGONITE 90 Degree Corner Clamp, 11 Inch Right Angle Clamps for Woodworking, Welding, Carpenter Photo Frame, Holding Assemblies Like Cabinets and
6 Bench Clamp with Automaxx - Grizzly Industrial
This popular clamp can handle frames from 5-Inch x 7-Inch to 26-Inch x 30-Inch if you have bigger frames it can be extended with a common bar clamp If
Grizzly Industrial G3047 - Adjustable Frame Clamp
Kreg KHCRA Automaxx Right Angle Clamp
Kreg 90 Degree Corner Clamp
90 Degree Clamp Corner Clamp - Right Angle for Woodworking 4 Pack 5.5x 5.5 Aluminum Alloy Woodworking Corner Clamps Wood Working Tools and Equipment L Square Aluminum Angle Clamp Tool #2
/cdn/shop/files/add1_2.webp?v=170
The BESSEY WS-3+2K is designed to clamp work Piece together at a 90 degree angle. The pivoting jaw adjusts automatically to different thicknesses of
2 in. Capacity 90-Degree Angle Clamp with 1-1/8 in. Throat Depth
The easy way to hold 90° corner joints and T joints in boxes, cabinets, and cases, The Kreg® 90° Corner Clamp gives you the helping hand you need to
90 Deg. Corner Clamp with Automaxx
Kreg KHCRA Automaxx Right Angle Clamp
Corner Clamp,90 Degree Right Angle Clamp for Woodworking,Aluminum Alloy Square Clamp,Adjustable Swing Jaw,Carbon Steel Threaded Rod Wood Working Jigs for Metal Welding,Photo Frame,Cabinet,Drawer Blue
Grizzly Industrial G3047 - Adjustable Frame Clamp - Picture Frame Framing Tools
This economical strap clamp makes it easy to assemble rectangular frames up to 144 in. in circumference. The high strength strap pulls evenly on both
Strap Clamp with 90-Degree Corner Pieces 12 ft. Capacity
